Set Up Devices

Before you start using IC-Inspection, you must configure the connections to video devices (IC-Recorder or a third-party DVR device), survey devices and any measurement or scale device that interface IC-Inspection. You must also set up text overlays to be applied on the recorded videos. You make these configurations on the Devices pane of IC-Inspection (see Devices).

On the Devices pane, you can set up the following:

• Add connections to video devices (see Add Video Devices)

• Add connections to survey devices (see Add Survey Devices)

• Add connections to measurement or scale devices, specifically, to a “Sartorius Entris Balance” device, which allows measuring the weight of very small things accurately. The device is usually connected through USB. This feature was developed for a specific area. You set this up similarly to survey devices (see Add Survey Devices), but instead of the Survey tab, you have the Input tab available, where you specify the parameters required for getting the weight data from the device.

• Set up text overlays to be displayed on the videos (see Set Up Text Overlays)

In case of any issues with the connections, you can use the Device Diagnostics pane for debugging purposes (see Device Diagnostics).